DeviceNet to Serial DA

 

This interface is designed to simplify PLC communications with Serial Devices on the factory floor.

Data received on the serial link is grouped and transmitted to the PLC via DeviceNet. Data transmitted by the PLC is collected and sent out the serial link.

Data is sent to the PLC after a user configurable number of bytes have been received on the serial link. Start and end delimiters can also be
used to capture complete packets before sending them to the PLC.

Multiple Serial DA modules can be connected to the same network enabling one PLC to communicate with several serial devices.

An extensive range of parameters allows you to configure the module to suit your serial device.

Features

  • DeviceNet™ network interface
  • Standard D9 connector or water resistant IP65 M12 option for rugged industrial conditions
  • RS232 serial interface
  • Serial baud rates 1200-57600
  • Multiple capturing modes including packet delimiting and packet size
  • 1 x 24V digital input
  • 1 x 24V digital output
  • Rugged DIN rail mounted aluminum enclosure
  • Simple easy to use interface
  • Cost effective

Specifications

Input 1 x 24VDC
 
Output 1 x 24VDC (1 Amp)
 
Module Current 50mA
 
Voltage Range 24VDC (from DeviceNet connector)
 
Operating Temperature -25 to 70̊ C
 
Dimensions (W x H x L) 30mm x 82mm x 115mm
 
 
Back...